Set Up A Fiber Laser Rotary Tool with EZCAD | COMPLETE GUIDE

Set Up A Fiber Laser Rotary Tool with EZCAD | COMPLETE GUIDE

ezcad fiber Feb 05, 2022

You guys have waited a long long long long long long time for this, and it's finally here! In this absolutely COMPLETE beginners guide I'll take you through every single step required between unboxing your fiber laser rotary and marking your first cylindrical object! The road is treacherous ahead but if you stay sharp and pay close attention you might just make it to the other side of this in one piece! Let's do it!

0:00 - Intro - Overview
1:50 - Initial Considerations
2:47 - Controller Overview
3:15 - Connecting Things
5:08 - Straightening
7:03 - Leveling
9:41 - Focusing
10:26 - Importing and Centering Artwork
10:58 - Hatch Settings
12:55 - Engraving Settings (Engrave)
13:14 - Red Laser Preview
13:30 - RotaryMark Parameters
15:01 - Selecting an Axis
16:00 - Pulse Rev (Pulses per round)
21:08 - Rotate Axis Settings
22:25 - Coordinate and Speed Settings
23:40 - Start Position
24:17 - Zero Settings and Homing
25:20 - Continuous and Mark Selected
26:17 - Split Size
27:34 - Part Diameter
28:30 - Rotary Red Laser Preview
28:55 - Rotary Engraving - First Pass
29:02 - Engraving Settings (Anneal)
30:06 - Rotary Engraving - Anneal Pass
30:23 - Final Look
31:26 - Final Thoughts
31:42 - Outro - Supporting the Channel